DIY kit for Tinkering with Paper Circuits with Sensors + Basic Full Kit

Description

Sensor Kit:

All contents of the above basic kit

Reed Switch – 1

Tilt Sensor – 1

IR sensor – 1

LDR Sensor – 1

Transistor – 2

Diode -1

Additional Learning Card – 5

Aluminium Conductive Tape with patented dispenser – 1 (70 ft+)

CR2032 Coin cell Battery – 10

LED’s 3mm/5mm (Red, green, yellow, blue, white, pink): 30 (5 each)

Continuity Tester: 1

Double-sided tissue tape: 1

Roll Learning Project Cards – 10

3D Printed Battery Holder – 1